3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
Pro95S Resin Tank SRI-0503007
The SprintRay Pro95 S resin tank works in perfect tandem with the printer to track resin usage and tank lifetime. The tank has an expected life of up to 30 liters of resin, leveraging patented STEM Tank technology.
Note: This tank is also backwards compatible with previous generation SprintRay Pro95 printers.
Related products
-
3D Spausdinimo dervos ir medžiagos, Dantų modeliai
SprintRay Die & Model Gray II – 1 kg. (SRI-0202011)
3D Spausdinimo dervos ir medžiagos, Dantų modeliaiSprintRay Die & Model Gray II – 1 kg. (SRI-0202011)
- Improved flexural modulus and strength
- Print up to eight full arch models in just 15 minutes*
- High-contrast color for maximum visibility of small details
- Easy to separate from thermoforming materials
SprintRay Die & Model 2 Gray represents a big step forward in dental 3D printing modelling materials. The gray color offers extremely high color contrast to help illustrate details. This new resin features almost no pigment settling, which means you can spend more time printing and less time mixing. Improved adhesion to the build plate is matched by an increase in flexural modulus and strength, providing higher success rates and a reduced chance of breakage.
A reduced odor improves the quality of life for 3D printing models for an overall experience that your practice staff will love. Die & Model 2 Gray features an improved color tone, making it easier than ever to use digital technology to perform advanced restorative dentistry. With rapid, repeatable results that are easier than ever to use, Die & Model 2 Gray is helping to bring dental 3D printing into dental practices everywhere.* When printed on SprintRay Pro with Ludicrous Speed profile.
SKU: SRI-0202011 -
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Crown B1 – 500 g. (SRE-0205043)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Crown B1 – 500 g. (SRE-0205043)
SprintRay Crown is a ceramic-filled hybrid material for 3D printing of single crowns, inlays, onlays and veneers. Easily finished and polished using traditional methods, this material offers excellent esthetics that conform to existing teeth.
High strength and wear resistance make SprintRay Crown a go-to material for restorative 3D printing. Because SprintRay Crown is FDA 510(k)-approved and meets all requirements for a Class II medical device, you can rely on this resin.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2 and D3. Available in US, EU, UK and EFTA.
- Biocompatible, FDA 510(k) cleared and meets all requirements for a Class II medical device
- Versatile: Use as a single crown on a natural tooth or abutment, as an inlay, onlay or veneer
- A very low water absorption reduces the tendency to age, a smooth surface means less plaque formation
SKU: SRE-0205043 -
3D Spausdinimo dervos ir medžiagos, Bandomieji protezai
Keystone KeyDenture Try-In A1 – 1 kg. (KEY-4220401)
3D Spausdinimo dervos ir medžiagos, Bandomieji protezaiKeystone KeyDenture Try-In A1 – 1 kg. (KEY-4220401)
Uses and Advantages
- Cost effective for try-in dentures
- Exceptional surface quality
- Easy to characterize
- Polishes to high luster
- Biocompatible medical device
- Free of MMA, BPA, and phthalates
KeyDenture Try-In™ takes the uncertainty out of the denture fitting process. Designed for precision and efficiency, KeyDenture Try-In is a photopolymer resin indicated for 3D printing of biocompatible, short-term trial dentures, intended for evaluation of fit, occlusion, esthetics, and phonetics during try-in appointments.
PROPERTY PROCEDURE KEYDENTURE TRY-IN Flexural Strength ASTM D790 56-68 MPa Flexural Modulus ASTM D790 1500-1750 MPa Water Sorption ISO 20795-1 9-13 μg/mm3 Elongation at Break ASTM D638 30-43% Biocompatibility ISO 10993 PASS SKU: KEY-4220401 -
3D Spausdinimo dervos ir medžiagos, Laikini vainikėliai ir tiltai
SprintRay EU Temporary Crown & Teeth A2 – 1 kg. (SRE-1001442)
3D Spausdinimo dervos ir medžiagos, Laikini vainikėliai ir tiltaiSprintRay EU Temporary Crown & Teeth A2 – 1 kg. (SRE-1001442)
- Long-term temporaries
- Denture teeth
- Fast fabrication
The SprintRay EU Crown and Teeth resin series are biocompatible resins for temporary crowns and bridges. Due to its material properties they can be used both for long-term temporaries and as Denture Teeth in combination with our SprintRay EU High Impact Denture Base.SKU: SRE-1001442 -
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Crown A2 – 500 g. (SRE-0205041)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Crown A2 – 500 g. (SRE-0205041)
SprintRay Crown is a ceramic-filled hybrid material for 3D printing of single crowns, inlays, onlays and veneers. Easily finished and polished using traditional methods, this material offers excellent esthetics that conform to existing teeth.
High strength and wear resistance make SprintRay Crown a go-to material for restorative 3D printing. Because SprintRay Crown is FDA 510(k)-approved and meets all requirements for a Class II medical device, you can rely on this resin.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2 and D3. Available in US, EU, UK and EFTA.
- Biocompatible, FDA 510(k) cleared and meets all requirements for a Class II medical device
- Versatile: Use as a single crown on a natural tooth or abutment, as an inlay, onlay or veneer
- A very low water absorption reduces the tendency to age, a smooth surface means less plaque formation
SKU: SRE-0205041