3D Spausdinimo dervos ir medžiagos, Išimami protezai
SprintRay High Impact Denture Base Light Pink – 1 kg. (SRE-1001312)
Digital dentures can reduce the number of appointments required for denture placement. SprintRay EU High Impact Denture Base resin is a biocompatible 3D printing resin for the generative fabrication of denture bases. SprintRay EU High Impact Denture Base is available in Orange Pink, Natural Pink, Light Pink & Deep Pink.
Related products
-
3D Spausdinimo dervos ir medžiagos, Dantų modeliai
SprintRay Die & Model Tan II – 1 kg. (SRI-0202010)
3D Spausdinimo dervos ir medžiagos, Dantų modeliaiSprintRay Die & Model Tan II – 1 kg. (SRI-0202010)
- Improved flexural modulus and strength
- Fantastic color and finish that mimics dental stone
- Easy to separate from thermoforming materials
SprintRay Die & Model 2 Tan represents a big step forward in dental 3D printing modelling materials. Our tan color mimics classic dental stone and features almost no pigment settling, which means you can spend more time printing and less time mixing. Improved adhesion to the build plate is matched by an increase in flexural modulus and strength, providing higher success rates and a reduced chance of breakage.
A reduced odor improves the quality of life for 3D printing models for an overall experience that your practice staff will love. Plus, Die & Model 2 resins are easier to separate from thermoforming materials, saving time and labor for more efficient in-office fabrication workflows. With rapid, repeatable results that are easier than ever to use, Die & Model 2 Tan is helping to bring dental 3D printing into dental practices everywhere.
* When printed on SprintRay Pro with Ludicrous Speed profile.
SKU: SRI-0202010 -
3D Spausdinimo dervos ir medžiagos, Laikini vainikėliai ir tiltai
SprintRay EU Temporary Crown & Teeth B1 – 1 kg. (SRE-1001618)
3D Spausdinimo dervos ir medžiagos, Laikini vainikėliai ir tiltaiSprintRay EU Temporary Crown & Teeth B1 – 1 kg. (SRE-1001618)
- Long-term temporaries
- Denture teeth
- Fast fabrication
The SprintRay EU Crown and Teeth resin series are biocompatible resins for temporary crowns and bridges. Due to its material properties they can be used both for long-term temporaries and as Denture Teeth in combination with our SprintRay EU High Impact Denture Base.SKU: SRE-1001618 -
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Crown A3 – 500 g. (SRE-0205042)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Crown A3 – 500 g. (SRE-0205042)
SprintRay Crown is a ceramic-filled hybrid material for 3D printing of single crowns, inlays, onlays and veneers. Easily finished and polished using traditional methods, this material offers excellent esthetics that conform to existing teeth.
High strength and wear resistance make SprintRay Crown a go-to material for restorative 3D printing. Because SprintRay Crown is FDA 510(k)-approved and meets all requirements for a Class II medical device, you can rely on this resin.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2 and D3. Available in US, EU, UK and EFTA.
- Biocompatible, FDA 510(k) cleared and meets all requirements for a Class II medical device
- Versatile: Use as a single crown on a natural tooth or abutment, as an inlay, onlay or veneer
- A very low water absorption reduces the tendency to age, a smooth surface means less plaque formation
SKU: SRE-0205042 -
3D Spausdinimo dervos ir medžiagos, Dantų modeliai
SprintRay Die & Model Gray II – 1 kg. (SRI-0202011)
3D Spausdinimo dervos ir medžiagos, Dantų modeliaiSprintRay Die & Model Gray II – 1 kg. (SRI-0202011)
- Improved flexural modulus and strength
- Print up to eight full arch models in just 15 minutes*
- High-contrast color for maximum visibility of small details
- Easy to separate from thermoforming materials
SprintRay Die & Model 2 Gray represents a big step forward in dental 3D printing modelling materials. The gray color offers extremely high color contrast to help illustrate details. This new resin features almost no pigment settling, which means you can spend more time printing and less time mixing. Improved adhesion to the build plate is matched by an increase in flexural modulus and strength, providing higher success rates and a reduced chance of breakage.
A reduced odor improves the quality of life for 3D printing models for an overall experience that your practice staff will love. Die & Model 2 Gray features an improved color tone, making it easier than ever to use digital technology to perform advanced restorative dentistry. With rapid, repeatable results that are easier than ever to use, Die & Model 2 Gray is helping to bring dental 3D printing into dental practices everywhere.* When printed on SprintRay Pro with Ludicrous Speed profile.
SKU: SRI-0202011 -
3D Spausdinimo dervos ir medžiagos, Dantų modeliai
SprintRay Study Model White II – 1 kg. (SRI-0202014)
3D Spausdinimo dervos ir medžiagos, Dantų modeliaiSprintRay Study Model White II – 1 kg. (SRI-0202014)
SprintRay Study Model White 2 is a special material formulation that provides outstanding color, clarity, and production speed, making it perfect for patient presentation. With a high curing efficiency, you can offer same-day mockups and waxups. Plus, get pure white prints every time thanks to an improved color formulation that doesn’t discolor during post-processing.
- Wow patients with same-visit mockups and waxups
- Print full-arch models in just 18 minutes
- Pure white color, even after post-curing
SKU: SRI-0202014