SRU 1.5 Day Training on campus
In-person group training
Immersive, hands-on experience at the SprintRay University in Weiterstadt, Germany
Detailed guidance on equipment maintenance, printing, and post processing
Printing t and post-processing of various workflows
Enhanced earning journey within a peer-sharing environment
Panašūs produktai
-
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Crown B1 – 500 g. (SRE-0205043)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Crown B1 – 500 g. (SRE-0205043)
0 out of 5(0)SprintRay Crown is a ceramic-filled hybrid material for 3D printing of single crowns, inlays, onlays and veneers. Easily finished and polished using traditional methods, this material offers excellent esthetics that conform to existing teeth.
High strength and wear resistance make SprintRay Crown a go-to material for restorative 3D printing. Because SprintRay Crown is FDA 510(k)-approved and meets all requirements for a Class II medical device, you can rely on this resin.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2 and D3. Available in US, EU, UK and EFTA.
- Biocompatible, FDA 510(k) cleared and meets all requirements for a Class II medical device
- Versatile: Use as a single crown on a natural tooth or abutment, as an inlay, onlay or veneer
- A very low water absorption reduces the tendency to age, a smooth surface means less plaque formation
SKU: SRE-0205043 -
3D Spausdinimo dervos ir medžiagos, Išimami protezai
SprintRay High Impact Denture Base Light Pink – 1 kg. (SRE-1001312)
3D Spausdinimo dervos ir medžiagos, Išimami protezaiSprintRay High Impact Denture Base Light Pink – 1 kg. (SRE-1001312)
0 out of 5(0)Digital dentures can reduce the number of appointments required for denture placement. SprintRay EU High Impact Denture Base resin is a biocompatible 3D printing resin for the generative fabrication of denture bases. SprintRay EU High Impact Denture Base is available in Orange Pink, Natural Pink, Light Pink & Deep Pink.
FLEXURAL STRENGTH
High impact strength reduces the chance of breakage under load.
SprintRay EU High Impact Denture Base
65 MPaFLEXURAL MODULUS
SprintRay EU High Impact Denture Base
2000 MPaSKU: SRE-1001302 -
3D Spausdinimo dervos ir medžiagos, Bandomieji protezai
Keystone KeyDenture Try-In A1 – 1 kg. (KEY-4220401)
3D Spausdinimo dervos ir medžiagos, Bandomieji protezaiKeystone KeyDenture Try-In A1 – 1 kg. (KEY-4220401)
0 out of 5(0)Uses and Advantages
- Cost effective for try-in dentures
- Exceptional surface quality
- Easy to characterize
- Polishes to high luster
- Biocompatible medical device
- Free of MMA, BPA, and phthalates
KeyDenture Try-In™ takes the uncertainty out of the denture fitting process. Designed for precision and efficiency, KeyDenture Try-In is a photopolymer resin indicated for 3D printing of biocompatible, short-term trial dentures, intended for evaluation of fit, occlusion, esthetics, and phonetics during try-in appointments.
PROPERTY PROCEDURE KEYDENTURE TRY-IN Flexural Strength ASTM D790 56-68 MPa Flexural Modulus ASTM D790 1500-1750 MPa Water Sorption ISO 20795-1 9-13 μg/mm3 Elongation at Break ASTM D638 30-43% Biocompatibility ISO 10993 PASS SKU: KEY-4220401 -
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Ceramic Crown B1 – 250g (SRI-0202058)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Ceramic Crown B1 – 250g (SRI-0202058)
0 out of 5(0)Introducing SprintRay Ceramic Crown, a new hybrid nanoceramic, FDA-cleared Class II resin for definitive full crowns, partial crowns, and veneers. Ceramic Crown is a Ceramic Dominant material, meaning it is formulated with more than 50% inorganic ceramic content, and is radiopaque for clear visibility in radiographs. High strength and resistance to wear make SprintRay Ceramic Crown a go-to material for definitive 3D crowns. This material is easy to finish and polish and features excellent aesthetics to blend with existing teeth.
SprintRay Ceramic Crown is launching as part of the world’s first full ecosystem designed for 3D printing same-day, definitive crowns with total end-to-end production time in <45 minutes.
- FDA Cleared. Ceramic Dominant Formulation (CDT code qualified )
- Radiopaque
- Smooth surface finish
- Excellent marginal fit and wear resistance
SHEAR BOND STRENGTH
Measures the adhesion of dental adhesives to a restoration
SPRINTRAY CERAMIC CROWN
34.7 MPALITHIUM DISILICATE
36.8 MPASKU: SRI-0202058 -
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatės
SprintRay Crown C2 – 500 g. (SRE-0205045)
3D Spausdinimo dervos ir medžiagos, Nuolatiniai vainikėliai, tiltai, užklotai/įklotai, laminatėsSprintRay Crown C2 – 500 g. (SRE-0205045)
0 out of 5(0)SprintRay Crown is a ceramic-filled hybrid material for 3D printing of single crowns, inlays, onlays and veneers. Easily finished and polished using traditional methods, this material offers excellent esthetics that conform to existing teeth.
High strength and wear resistance make SprintRay Crown a go-to material for restorative 3D printing. Because SprintRay Crown is FDA 510(k)-approved and meets all requirements for a Class II medical device, you can rely on this resin.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2 and D3. Available in US, EU, UK and EFTA.
- Biocompatible, FDA 510(k) cleared and meets all requirements for a Class II medical device
- Versatile: Use as a single crown on a natural tooth or abutment, as an inlay, onlay or veneer
- A very low water absorption reduces the tendency to age, a smooth surface means less plaque formation
SKU: SRE-0205045